Audi A4 B7 A6 C6 Engine Oil Sump Pan 2.0 TFSI Petrol 06B103601CG

Audi A4 B7 A6 C6 Engine Oil Sump Pan 2.0 TFSI Petrol is an original component from the Oil sumps group, designed for petrol-powered engines. It ensures a leak-proof oil circulation system, stable mounting to the engine block, and safe drainage of the lubricant in 2.0 TFSI engines, which is crucial for the durability and smooth operation of the power unit.

Specifications and technical data

• SKU: 06B103601CG
• Mark: Audi
• Condition: Used
• OEM Part Number: 06B103601CG
• Substitutable numbers: 06B103601CG, 06B 103 601 CG
• Fuel type: Petrol
• Category: Oil Sumps

Purpose and function in the lubrication system

The oil sump in a 2.0 TFSI petrol engine acts as a working reservoir for the oil, in which the pump's suction system is submerged. It is responsible for:

• maintaining the correct amount of oil in circulation,
• stabilizing the temperature of the lubricant by dissipating heat to the surroundings,
• ensuring the proper oil level under various loads and engine speeds,
• providing a tight connection with the engine block and other lubrication system components.

A properly selected oil sump for the 2.0 TFSI engine reduces the risk of oil pressure drops, which translates into the protection of bearings, the crankshaft, the timing system, and the turbocharger.

Benefits of using an original Audi oil sump

Using an original component from the Oil sumps group in Audi A4 B7 and A6 C6 models allows for maintaining the factory operating parameters of the engine. The most important advantages include:

• precise fit to the engine block and accessories,
• preservation of the factory internal geometry of the sump, which affects proper oil suction by the pump,
• compatibility with original seals and mounting elements,
• consistency with service documentation and manufacturer procedures.

As a result, the replacement process is predictable, and the risk of leaks or improper operation of the lubrication system is minimized.

Product characteristics and installation

The offered oil sump is a component designed for petrol engines, meaning its construction is adapted to the specific operation of spark-ignition units. The internal shape, the arrangement of embossments, and the oil accumulation zones are optimized for the flow characteristics of 2.0 TFSI engines.

During installation, it is recommended to:

• thoroughly clean the contact surface with the engine block,
• use new sealing elements in accordance with the manufacturer's recommendations,
• check bolt tightening torques according to service data,
• verify the oil level after the first start and a short period of engine operation.

Performing the replacement in this manner allows for fully utilizing the potential of the offered component and maintaining stable lubrication conditions across the entire load range.

Application in service practice

In vehicles used intensively, especially those with turbocharged engines, the oil sump is exposed to mechanical damage and changes resulting from years of operation. Replacing it with a proven component allows you to:

• remove the effects of previous makeshift repairs (e.g., leaking seals),
• minimize the risk of oil leaks onto exhaust or suspension components,
• restore the proper operating conditions of the oil pump,
• maintain stable oil pressure across the entire RPM range.

This is particularly important in 2.0 TFSI units, where the quality of lubrication has a direct impact on the durability of the crank-piston system and accessories.

Condition and origin

The offered oil sump is a used component, which in service practice often represents a reasonable compromise between cost and maintaining the original manufacturer's specification. In the case of parts from the Oil sumps group, it is essential to maintain the factory geometry and mounting points, which facilitates installation and reduces vehicle downtime.

If you are planning a comprehensive repair or upgrade of the engine area in your Audi and need other elements from the same group, such as sump bodies, covers, or mounting hardware, check the available parts in the Audi oil sumps category.

For drivers interested in comparing solutions used in different brands and sports versions, an interesting addition to your knowledge might be an article describing the differences between standard and sports components – you can find it here: BMW M Performance: how do BMW M components differ from standard ones?.